VCBM 18: Eurographics Workshop on Visual Computing for Biology and Medicine

Permanent URI for this collection

https://diglib.eg.org/handle/10.2312/2632660

Browse

Now showing 1 - 20 of 25

Visual Analytics in Histopathology Diagnostics: a Protocol-Based Approach
(The Eurographics Association, 2018) Corvò, Alberto; Westenberg, Michel A.; Driel, Marc A. van; Wijk, Jarke J.van; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Computer-Aided-Diagnosis (CAD) systems supporting the diagnostic process are widespread in radiology. Digital Pathology is still behind in the introduction of such solutions. Several studies investigated pathologists' behavior but only a few aimed to improve the diagnostic and report process with novel applications. In this work we designed and implemented a first protocol-based CAD viewer supported by visual analytics. The system targets the optimization of the diagnostic workflow in breast cancer diagnosis by means of three image analysis features that belong to the standard grading system (Nottingham Histologic Grade). A pathologist's routine was tracked during the examination of breast cancer tissue slides and diagnostic traces were analyzed from a qualitative perspective. Accordingly, a set of generic requirements was elicited to define the design and the implementation of the CAD-Viewer. A first qualitative evaluation conducted with five pathologists shows that the interface suffices the diagnostic workflow and diminishes the manual effort. We present promising evidence of the usefulness of our CAD-viewer and opportunities for its extension and integration in clinical practice. As a conclusion, the findings demonstrate that it is feasibile to optimize the Nottingham Grading workflow and, generally, the histological diagnosis by integrating computational pathology data with visual analytics techniques.
Visual Analysis of Regional Anomalies in Myocardial Motion
(The Eurographics Association, 2018) Sheharyar, Ali; Ruh, Alexander; Aristova, Maria; Scott, Michael; Jarvis, Kelly; Elbaz, Mohammed; Dolan, Ryan; Schnell, Susanne; Lin, Kal; Carr, James; Markl, Michael; Bouhali, Othmane; Linsen, Lars; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Regional anomalies in the myocardial motion of the left ventricle (LV) are important biomarkers for several cardiac diseases. Myocardial motion can be captured using a velocity-encoded magnetic resonance imaging method called tissue phase mapping (TPM). The acquired data are pre-processed and represented as regional velocities in cylindrical coordinates at three short-axis slices of the left ventricle over one cardiac cycle. We use a spatio-temporal visualization based on a radial layout where the myocardial regions are laid out in an angular pattern similar to the American Heart Association (AHA) model and the temporal dimension increases with increasing radius. To detect anomalies, we compare patient data against the myocardial motion of a cohort of healthy volunteers. For the healthy volunteer cohort, we compute nested envelopes of central regions for the time series of each region and each of the three velocity directions based on the concept of functional boxplots. A quantitative depiction of deviations from the spatio-temporal pattern of healthy heart motion allows for quick detection of regions of interests, which can then be analyzed in more detail by looking at the actual time series. We evaluated our approach in a qualitative user study with imaging and medical experts. The participants appreciated the proposed encoding and considered it a substantial improvement over the current methods.
VisualFlatter - Visual Analysis of Distortions in the Projection of Biomedical Structures
(The Eurographics Association, 2018) Grossmann, Nicolas; Köppel, Thomas; Gröller, Eduard; Raidou, Renata Georgia; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Projections of complex anatomical or biological structures from 3D to 2D are often used by visualization and domain experts to facilitate inspection and understanding. Representing complex structures, such as organs or molecules, in a simpler 2D way often requires less interaction, while enabling comparability. However, the most commonly employed projection methods introduce size or shape distortions, in the resulting 2D representations. While simple projections display known distortion patterns, more complex projection algorithms are not easily predictable.We propose the VisualFlatter, a visual analysis tool that enables visualization and domain experts to explore and analyze projection-induced distortions, in a structured way. Our tool provides a way to identify projected regions with semantically relevant distortions and allows users to comparatively analyze distortion outcomes, either from alternative projection methods or due to different setups through the projection pipeline. The user is given the ability to improve the initial projection configuration, after comparing different setups. We demonstrate the functionality of our tool using four scenarios of 3D to 2D projections, conducted with the help of domain or visualization experts working on different application fields. We also performed a wider evaluation with 13 participants, familiar with projections, to assess the usability and functionality of the Visual Flatter.
Parameterization and Feature Extraction for the Visualization of Tree-like Structures
(The Eurographics Association, 2018) Lichtenberg, Nils; Lawonn, Kai; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
The study and visualization of vascular structures, using 3D models obtained from medical data, is an active field of research. Illustrative visualizations have been applied to this domain in multiple ways. Researchers have tried to make the geometric properties of vasculature more comprehensive and to augment the surface with representations of multivariate clinical data. Techniques that head beyond the application of color-maps or simple shading approaches require a sort of surface parameterization, i.e., texture coordinates, in order to overcome locality. When extracting 3D models, the computation of texture coordinates on the mesh is not always part of the data processing pipeline. We combine existing techniques to a simple, yet effective, parameterization approach that is suitable for tree-like structures. The parameterization is done w.r.t. to a pre-defined source vertex. For this, we present an automatic algorithm, that detects the root of a tree-structure. The parameterization is partly done in screen-space and recomputed per frame. However, the screen-space computation comes with positive features that are not present in object-space approaches. We show how the resulting texture coordinates can be used for varying hatching, contour parameterization, the display of decals, as an additional depth cue and feature extraction.
A Prototype Holographic Augmented Reality Interface for Image-Guided Prostate Cancer Interventions
(The Eurographics Association, 2018) Morales Mojica, Cristina M.; Velazco Garcia, Jose D.; Navkar, Nikhil V.; Balakrishnan, Shidin; Abinahed, Julien; El Ansari, Walid; Al-Rumaihi, Khalid; Darweesh, Adham; Al-Ansari, Abdulla; Gharib, Mohamed; Karkoub, Mansour; Leiss, Ernst L.; Seimenis, Ioannis; Tsekos, Nikolaos V.; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Motivated by the potential of holographic augmented reality (AR) to offer an immersive 3D appreciation of morphology and anatomy, the purpose of this work is to develop and assess an interface for image-based planning of prostate interventions with a head-mounted display (HMD). The computational system is a data and command pipeline that links a magnetic resonance imaging (MRI) scanner/data and the operator, that includes modules dedicated to image processing and segmentation, structure rendering, trajectory planning and spatial co-registration. The interface was developed with the Unity3D Engine (C#) and deployed and tested on a HoloLens HMD. For ergonomics in the surgical suite, the system was endowed with hands-free interactive manipulation of images and the holographic scene via hand gestures and voice commands. The system was tested in silico using MRI and ultrasound datasets of prostate phantoms. The holographic AR scene rendered by the HoloLens HMD was subjectively found superior to desktop-based volume or 3D rendering with regard to structure detection and appreciation of spatial relationships, planning access paths and manual co-registration of MRI and Ultrasound. By inspecting the virtual trajectory superimposed to rendered structures and MR images, the operator observes collisions of the needle path with vital structures (e.g. urethra) and adjusts accordingly. Holographic AR interfacing with wireless HMD endowed with hands-free gesture and voice control is a promising technology. Studies need to systematically assess the clinical merit of such systems and needed functionalities.
A Framework for Visual Comparison of 4D PC-MRI Aortic Blood Flow Data
(The Eurographics Association, 2018) Behrendt, Benjamin; Ebel, Sebastian; Gutberlet, Matthias; Preim, Bernhard; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Four-dimensional phase-contrast magnetic resonance imaging (4D PC-MRI) allows for the non-invasive acquisition of in-vivo blood flow, producing a patient-specific blood flow model in selected vascular structures, e.g. the aorta. In the past, many specialized techniques for the visualization and exploration of such datasets have been developed, yet a tool for the visual comparison of multiple datasets is missing. Due to the complexity of the underlying data, a simple side-by-side comparison of two datasets using traditional visualization techniques can only yield coarse results. In this paper, we present a toolkit that allows for an efficient and robust registration of different 4D PC-MRI datasets and offers a variety of both qualitative and quantitative comparison techniques. Differences in the segmentation and time frame can be amended semi-automatically using landmarks on the vessel centerline and flow curve of the datasets. A set of measures quantifying the difference between the datasets, such as the flow jet displacement or flow angle and velocity difference, is automatically computed. To support the orientation in the spatio-temporal domain of the flow dataset, we provide bulls-eye plots that highlight potentially interesting regions. In an evaluation with three experienced radiologists, we confirmed the usefulness of our technique. With our application, they were able to discover previously unnoticed artifacts occurring in a dataset acquired with an experimental MRI sequence.
Uncertainty-Guided Semi-Automated Editing of CNN-based Retinal Layer Segmentations in Optical Coherence Tomography
(The Eurographics Association, 2018) Zadeh, Shekoufeh Gorgi; Wintergerst, Maximilian W. M.; Schultz, Thomas; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Convolutional neural networks (CNNs) have enabled dramatic improvements in the accuracy of automated medical image segmentation. Despite this, in many cases, results are still not reliable enough to be trusted ''blindly''. Consequently, a human rater is responsible to check correctness of the final result and needs to be able to correct any segmentation errors that he or she might notice. For a particular use case, segmentation of the retinal pigment epithelium and Bruch's membrane from Optical Coherence Tomography, we develop a system that makes this process more efficient by guiding the rater to segmentations that are most likely to require attention from a human expert, and by developing semi-automated tools for segmentation correction that exploit intermediate representations from the CNN.We demonstrate that our automated ranking of segmentation uncertainty correlates well with a manual assessment of segmentation quality, and with distance to a ground truth segmentation. We also show that, when used together, uncertainty guidance and our semi-automated editing tools decrease the time required for segmentation correction by more than a factor of three.
Visual Analysis of Evolution of EEG Coherence Networks employing Temporal Multidimensional Scaling
(The Eurographics Association, 2018) Ji, Chengtao; Maurits, Natasha M.; Roerdink, Jos B. T. M.; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
The community structure of networks plays an important role in their analysis. It represents a high-level organization of objects within a network. However, in many application domains, the relationship between objects in a network changes over time, resulting in the change of community structure (the partition of a network), their attributes (the composition of a community and the values of relationships between communities), or both. Previous animation or timeline-based representations either visualize the change of attributes of networks or the community structure. There is no single method that can optimally show graphs that change in both structure and attributes. In this paper we propose a method for the case of dynamic EEG coherence networks to assist users in exploring the dynamic changes in both their community structure and their attributes. The method uses an initial timeline representation which was designed to provide an overview of changes in community structure. In addition, we order communities and assign colors to them based on their relationships by adapting the existing Temporal Multidimensional Scaling (TMDS) method. Users can identify evolution patterns of dynamic networks from this visualization.
Global and Local Mesh Morphing for Complex Biological Objects from µCT Data
(The Eurographics Association, 2018) Knötel, David; Becker, Carola; Scholtz, Gerhard; Baum, Daniel; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
We show how biologically coherent mesh models of animals can be created from µCT data to generate artificial yet naturally looking intermediate objects. The whole pipeline of processing algorithms is presented, starting from generating topologically equivalent surface meshes, followed by solving the correspondence problem, and, finally, creating a surface morphing. In this pipeline, we address all the challenges that are due to dealing with complex biological, non-isometric objects. For biological objects it is often particularly important to obtain deformations that look as realistic as possible. In addition, spatially non-uniform shape morphings that only change one part of the surface and keep the rest as stable as possible are of interest for evolutionary studies, since functional modules often change independently from one another. We use Poisson interpolation for this purpose and show that it is well suited to generate both global and local shape deformations.
ICG based Augmented-Reality-System for Sentinel Lymph Node Biopsy
(The Eurographics Association, 2018) Noll, Matthias; Noa-Rudolph, Werner; Wesarg, Stefan; Kraly, Michael; Stoffels, Ingo; Klode, Joachim; Spass, Cédric; Spass, Gerrit; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
In this paper we introduce a novel augmented-reality (AR) system for the sentinel lymph node (SLN) biopsy. The AR system consists of a cubic recording device with integrated stereo near-infrared (NIR) and stereo color cameras, an head mounted display (HMD) for visualizing the SLN information directly into the physicians view and a controlling software application. The labeling of the SLN is achieved using the fluorescent dye indocyanine green (ICG). The dye accumulates in the SLN where it is excited to fluorescence by applying infrared light. The fluorescence is recorded from two directions by the NIR stereo cameras using appropriate filters. Applying the known rigid camera geometry, an ICG depth map can be generated from the camera images, thus creating a live 3D representation of the SLN. The representation is then superimposed to the physicians field of view, by applying a series of coordinate system transformations, that are determined in four separate system calibration steps. To compensate for the head motion, the recording systems is continuously tracked by a single camera on the HMD using fiducial markers. Because the system does not require additional monitors, the physicians attention is kept solely on the operation site. This can potentially decrease the intervention time and render the procedure safer for the patient.
Frontmatter: Eurographics Workshop on Visual Computing for Biology and Medicine 2018
(The Eurographics Association, 2018) Puig Puig, Anna; Schultz, Thomas; Vilanova, Anna; Hotz, Ingrid; Kozlikova, Barbora; Vázquez, Pere-Pau; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Progressive and Efficient Multi-Resolution Representations for Brain Tractograms
(The Eurographics Association, 2018) Mercier, Corentin; Gori, Pietro; Rohmer, Damien; Cani, Marie-Paule; Boubekeur, Tamy; Thiery, Jean-Marc; Bloch, Isabelle; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Current tractography methods generate tractograms composed of millions of 3D polylines, called fibers, making visualization and interpretation extremely challenging, thus complexifying the use of this technique in a clinical environment. We propose to progressively simplify tractograms by grouping similar fibers into generalized cylinders. This produces a fine-grained multiresolution model that provides a progressive and real-time navigation through different levels of detail. This model preserves the overall structure of the tractogram and can be adapted to different measures of similarity. We also provide an efficient implementation of the method based on a Delaunay tetrahedralization. We illustrate our method using the Human Connectome Project dataset.
Ultrasound Decompression for Large Field-of-View Reconstructions
(The Eurographics Association, 2018) Schulte zu Berge, Christian; Salehi, Mehrdad; Bender, Frederik; Wein, Wolfgang; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Tracked medical ultrasound allows for cost-effective and radiation-free imaging of anatomy featuring a very high spatial resolution. To overcome the limitations of the small field-of-view, sonographers can acquire multiple adjacent sweeps and compound them into a single volumetric representation. However, due to the inherent local and non-uniform compression of the underlying anatomy (caused by the ultrasound probe) the adjacent sweeps often exhibit poor alignment and discontinuities. We propose a novel decompression model to compensate for probe pressure related artifacts. It incorporates domain knowledge of the global acquisition pattern for regularization and allows for seamless stitching of multiple overlapping 3D freehand sweeps into one volume. The resulting extended field-of-view visualization provides the clinician with spatial context so that the relationship between individual features are easier to understand. Our experiments show that the resulting extended field-of-view reconstructions have a superior image quality in terms of alignment and continuity of the visible anatomy compared to the original acquisitions. Comparison to ground truth MRI data demonstrates the plausibility of our non-rigid decompression model.
Improving Perception of Molecular Surface Visualizations by Incorporating Translucency Effects
(The Eurographics Association, 2018) Hermosilla, Pedro; Maisch, Sebastian; Vázquez, Pere-Pau; Ropinski, Timo; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Molecular surfaces are a commonly used representation in the analysis of molecular structures as they provide a compact description of the space occupied by a molecule and its accessibility. However, due to the high abstraction of the atomic data, fine grain features are hard to identify. Moreover, these representations involve a high degree of occlusions, which prevents the identification of internal features and potentially impacts shape perception. In this paper, we present a set of techniques which are inspired by the properties of translucent materials, that have been developed to improve the perception of molecular surfaces: First, we introduce an interactive algorithm to simulate subsurface scattering for molecular surfaces, in order to improve the thickness perception of the molecule. Second, we present a technique to visualize structures just beneath the surface, by still conveying relevant depth information. And lastly, we introduce reflections and refractions into our visualization that improve the shape perception of molecular surfaces. We evaluate the benefits of these methods through crowd-sourced user studies as well as the feedback from several domain experts.
A Multilinear Model for Bidirectional Craniofacial Reconstruction
(The Eurographics Association, 2018) Achenbach, Jascha; Brylka, Robert; Gietzen, Thomas; Hebel, Katja zum; Schömer, Elmar; Schulze, Ralf; Botsch, Mario; Schwanecke, Ulrich; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
We present a bidirectional facial reconstruction method for estimating the skull given a scan of the skin surface and vice versa estimating the skin surface given the skull. Our approach is based on a multilinear model that describes the correlation between the skull and the facial soft tissue thickness (FSTT) on the one hand and the head/face surface geometry on the other hand. Training this model requires to densely sample the Cartesian product space of skull shape times FSTT variation, which cannot be obtained by measurements alone. We generate this data by enriching measured data-volumetric computed tomography scans and 3D surface scans of the head-by simulating statistically plausible FSTT variations. We demonstrate the versatility of our novel multilinear model by estimating faces from given skulls as well as skulls from given faces within just a couple of seconds. To foster further research in this direction, we will make our multilinear model publicly available.
Visual Assessment of Vascular Torsion using Ellipse Fitting
(The Eurographics Association, 2018) Mistelbauer, Gabriel; Zettwitz, Martin; Schernthaner, Rüdiger; Fleischmann, Dominik; Teutsch, Christian; Preim, Bernhard; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Blood vessels are well explored and researched in medicine and visualization. However, the investigation of vascular torsion has yet been unexplored. In order to understand the development and current state of a single blood vessel or even multiple connected ones, properties of vascular structures have to be analyzed. In this paper we assess the torsion of blood vessels in order to better understand their morphology. The aim of this work is to quantitatively gauge blood vessels by using an automated method that assumes an elliptical blood vessel model. This facilitates using state-of-the-art ellipse fitting algorithms from industrial measuring standards. In order to remove outliers, we propose a self-correcting iterative refitting of ellipses using neighboring information. The torsion information is visually conveyed by connecting the major and minor points of adjacent ellipses. Our final visualization comprises a visual representation of the blood vessel including four bands to outline the torsion.
Semantic Screen-Space Occlusion for Multiscale Molecular Visualization
(The Eurographics Association, 2018) Koch, Thomas Bernhard; Kouril, David; Klein, Tobias; Mindek, Peter; Viola, Ivan; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Visual clutter is a major problem in large biological data visualization. It is often addressed through the means of level of detail schemes coupled with an appropriate coloring of the visualized structures. Ambient occlusion and shadows are often used to improve the depth perception. However, when used excessively, these techniques are sources of visual clutter themselves. In this paper we present a new approach to screen-space illumination algorithms suitable for use in illustrative visualization. The illumination effect can be controlled so that desired levels of semantic scene organization cast shadows while other remain flat. This way the illumination design can be parameterized to keep visual clutter, originating from illumination, to a minimum, while also guiding the user in a multiscale model exploration. We achieve this by selectively applying occlusion shading based on the inherent semantics of the visualized hierarchically-organized data. The technique is in principle generally applicable to any hierarchically organized 3D scene and has been demonstrated on an exemplary scene from integrative structural biology.
A Critical Analysis of the Evaluation Practice in Medical Visualization
(The Eurographics Association, 2018) Preim, Bernhard; Ropinski, Timo; Isenberg, Petra; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Medical visualization aims at directly supporting physicians in diagnosis and treatment planning, students and residents in medical education, and medical physicists as well as other medical researchers in answering specific research questions. For assessing whether single medical visualization techniques or entire medical visualization systems are useful in this respect, empirical evaluations involving participants from the target user group are indispensable. The human computer interaction field developed a wide range of evaluation instruments, and the information visualization community more recently adapted and refined these instruments for evaluating (information) visualization systems. However, often medical visualization lacks behind and should pay more attention to evaluation, in particular to evaluations in realistic settings that may assess how visualization techniques contribute to cognitive activities, such as deciding about a surgical strategy or other complex treatment decisions. In this vein, evaluations that are performed over a longer period are promising to study, in order to investigate how techniques are adapted. In this paper, we discuss the evaluation practice in medical visualization based on selected examples and contrast these evaluations with the broad range of existing empirical evaluation techniques. We would like to emphasize that this paper does not serve as a general call for evaluation in medical visualization, but argues that the individual situation must be assessed and that evaluations when they are carried out should be done more carefully.
Introducing CNN-Based Mouse Grim Scale Analysis for Fully Automated Image-Based Assessment of Distress in Laboratory Mice
(The Eurographics Association, 2018) Kopaczka, Marcin; Ernst, Lisa; Schock, Justus; Schneuing, Arne; Guth, Alexander; Tolba, Rene; Merhof, Dorit; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
International standards require close monitoring of distress of animals undergoing laboratory experiments in order to minimize the stress level and allow choosing minimally stressful procedures for the experiments. Currently, one of the the best established severity assessment procedures is the mouse grimace scale (MGS), a protocol in which images of the animals are taken and scored by assessing five key visual features that have been shown to be highly correlated with distress and pain. While proven to be highly reliable, MGS assessment is currently a time-consuming task requiring manual video processing for key frame extraction and subsequent expert grading. Additionally, due to the the high per-picture expert time required, MGS scoring is performed on a small number of selected frames from a video. To address these shortcomings, we introduce a method for fully automated real-time MGS scoring of orbital eye tightening, one of the five sub-scores. We define and evaluate the method which is centered around a set of convolutional neural networks (CNNs) and allows live continuous MGS assessment of a mouse in real time. We additionally describe a multithreaded client-server architecture with a graphical user interface that allows convenient use of the developed method for simultaneous real-time MGS scoring of several animals.
Visual Exploratory Analysis for Multiple T-Maze Studies
(The Eurographics Association, 2018) Bechtold, Fabrizia; Splechtna, Rainer; Matkovic, Kresimir; Puig Puig, Anna and Schultz, Thomas and Vilanova, Anna and Hotz, Ingrid and Kozlikova, Barbora and Vázquez, Pere-Pau
Evaluation of spatial learning and memory in rodents is commonly carried out using different maze settings such as the Multiple T-Maze. State-of-the-art analysis is primarily based on statistics of quantitative measures stemming from animal trajectories in a maze, e.g. path length or correct decisions made. Currently trajectories themselves are analyzed and evaluated one at a time and comparison of multiple trajectories is a tedious task. The resulting findings may not fully answer complex questions that behavioral researchers encounter as well, e.g., why do animals behave in a certain way or can atypical behaviour be detected? This paper describes an innovative approach on how exploratory analysis for Multiple T-Maze studies can be enhanced through interactive visual analysis. We explain our solution for analyzing a whole ensemble of data at once and support the finding of orientational characteristics and migration patterns within the ensemble. We also abstract the analysis tasks for Multiple TMaze studies and, based on these tasks, we extend a coordinated multiple views system to support the solving of fundamental problems which behavioral researchers face. Besides views of standard charts we deploy a multi-resolution heat map and the Gate-O-Gon, which is a novel visual element. It gives clues on the animals' general movement orientation and distribution of revisited gates, as well as enhances the discovery of patterns in movement and identifying of irregular behavior. Finally we demonstrate the usefulness of the newly proposed approach using a real life data set consisting of 400 Multiple T-Maze runs.

Browse

Browsing VCBM 18: Eurographics Workshop on Visual Computing for Biology and Medicine by Issue Date

Results Per Page

Sort Options